In our project we are designed steam power through the power plant.Generate the electric power in order to compensate the electric power demand.
• Turbine arrangement
• Pressure gauge
• Safty valve
• Gate valve
This type of project is used to steam storage areas. When the high pressure of steam flow through the turbine in that turbine will be rotate the rotating speed is depends upon the pressure of stem flow.
For this tank we are using pressure gauge it is maintain the tank or steam pressure.heater using heat water Dynamo is coupled with turbine it is a permanent magnate with a coil arrangement whenever the turbine is rotating the moving coil in the dynamo also rotate.
Due to that alternating voltage is generated. Then AC voltage is given to rectifier circuit to convert the DC voltage. After that the rectified voltage is fed to filter circuit in order to filter the AC ripples.
Then the filtered DC voltage is stored in the Battery.this steam power convert to inverter and and activate the CFL lamp. This stored DC voltage used to different application. Through this way electric power is generated and compensated to the electric demand. So this project is steam power plant.