A “Server Error” on SumUp typically means the app or card reader cannot communicate with SumUp’s central system. This is usually due to a temporary service outage, a weak internet connection, or an outdated app.
Here is how to fix it:
1. Check if SumUp is Down (Most Likely)
If you see a “500,” “Bad Gateway,” or “Internal Server Error,” the problem is likely on SumUp’s end, not yours.
Check the Official Status Page: Go to status.sumup.com (select your country if prompted) or check a third-party site like Downdetector.
If there is an outage: You simply have to wait until they fix it. These usually resolve within 30–60 minutes.
2. Fix Your Connection
If the status page says “Operational,” the issue is likely your internet connection.
Toggle Flight Mode: Turn Flight Mode ON for 10 seconds, then turn it OFF. This resets your cellular data connection.
Switch Networks: If you are on Wi-Fi, switch to mobile data (or vice versa) to see if the error clears.
Test Connectivity: Open a web browser on your device and load a generic webpage (like Google) to ensure you actually have internet access.
3. Troubleshooting the App & Reader
If your internet is fine but the error persists:
Log Out and In: Force a fresh connection by logging out of the SumUp app and logging back in.
Update the App: Check the App Store or Google Play Store. Using an old version of the app often causes server disconnects.
Restart the Reader: Hold the power button on your card reader (Air, Solo, or 3G) for roughly 10 seconds to force a reboot.
Reset Bluetooth (For “Air” Readers): If the reader isn’t connecting to the server via your phone, turn off your phone’s Bluetooth, close the app, turn Bluetooth back on, and try the transaction again.
Also Read : Why is Blooket Not Working
Summary:
If this just started happening right now, it is highly probable that SumUp is performing maintenance or having a small outage. Wait 15 minutes and try again.
Be the first to comment