now.dstv.com/tv Code Activation : now.dstv.com /tv Login | Not Working

When DSTv not Working: Contact DStv customer care for assistance. They can help you troubleshoot the problem or arrange for a technician to visit.

Here’s a breakdown of common causes and troubleshooting steps to get you back to your favorite shows:

1. Basic Checks:

• Power: Is your decoder plugged in and switched on? Check the power outlet too.
• Cables: Are all the cables securely connected to your decoder, TV, and satellite dish? Give them a wiggle to ensure they’re snug.
• Smartcard: If you have a smartcard, make sure it’s inserted correctly.

2. Decoder Reboot:

• Unplug: Unplug your decoder from the power source.
• Wait: Wait for about 10-15 seconds.
• Plug back in: Plug the decoder back in and let it restart. This often fixes minor glitches.

3. Signal Issues:

• “No Signal” Message: This is a common problem. It usually means your decoder isn’t receiving a signal from the satellite dish.
  • Check the Dish: Make sure your satellite dish is still properly aligned. Strong winds or storms can knock it out of place.
  • Obstructions: Are there any new trees, buildings, or other objects blocking the line of sight between your dish and the satellite?
  • Weather: Heavy rain or snow can sometimes interfere with the signal. Wait for the weather to clear up.
• Signal Strength and Quality:
  • Check: Use your DStv remote to check the signal strength and quality. If they’re low, you might need to adjust your dish or call a technician.

4. Error Codes:

• Note the Code: If you see an error code on your screen (like E48-32), write it down.
• DStv Website: Go to the DStv website and look up the error code. They usually have troubleshooting tips for specific errors.

5. Other Issues:

• Subscription: Make sure your DStv subscription is up to date. An expired subscription will cut off your service.
• Decoder Problems: If you’ve tried everything and your DStv still isn’t working, there might be a problem with your decoder itself.

DStv activation typically involves these steps:

1. Make a subscription payment: You need to pay for a DStv subscription package before activating your decoder. You can do this through various channels like banks, online payment platforms, or DStv self-service portals.

2. Activate your decoder: Once payment is confirmed, you need to activate your decoder. This can often be done by sending an SMS to a specific number (like 30333) with your smartcard number. The exact format of the SMS might vary depending on your location, so it’s best to check DStv’s official website or contact their customer support for the correct information.

3. Wait for confirmation: After sending the activation SMS, you should receive a confirmation message indicating that your decoder is activated. You should then be able to access DStv channels.

Some regions might have additional or alternative activation methods, like using a USSD code or activating through the DStv website or app.

Activation processes and contact details might vary depending on your location. Always refer to official DStv resources for the most accurate information.

now.dstv.com/tv Code Activation

To activate your DSTV Code, login in to https://now.dstv.com/tv and enter the 5 digit Activation Code as displayed on your TV screen. now.dstv.com/tv Code Activation allows you to stream an infinite amount of films and TV episodes.

DStv do not support side loading the DStv Now app on devices, the app must be installed via the play store. For legal reasons, the DStv Now app is not available on uncertified Google devices. Please ensure that you are using a Google-certified device by going to Google Play Store Menu -> Settings -> Device Certification.

Also Read : dstv.stream/tv Code Login

How to Activate DSTV

1. Connect your smart TV to the internet using ethernet cable or Wi-Fi

2. Go to the App Store on your TV, search for “DStv Now”, and install the app

3. Once installed, the app will display a code on your TV screen

4. On a laptop/desktop, go to now.dstv.com and sign in

5. Once signed in, go to now.dstv.com/tv and enter the code displayed on the TV, then click on the “Sign in on TV” button

6. The app will now be live on the TV

Setup Pairing

Setup Pairing screen is used for pairing Smart Cards with Decoders. In the system, if single STB exists for a customer, then the pairing can be done implicitly. But for more than one STB, the smart cards and decoders are paired explicitly.

Through this screen an existing pairing can also be modified or cancelled.

To pair smart cards with decoders:

1. On the Provisioning module, click Setup Pairing.

2. Retrieve details of the customer. The details like Customer Name, available smart card and decoder details appear in Pairing Details table.

3. To do a pairing, click the Add link in Pairing Details table.

4. Select the type of smart card from SmartCard Code drop down. All the available smart card numbers of the specific type appear in SmartCard No. drop down. Select the required number to be paired with decoder.

5. Select the type of decoder from Decoder Code drop down. All the available decoder numbers of the specific type appear in Decoder No. drop down. Select the required number to be paired with the selected smart card.

6. Click the Save button to pair the selected smart card with the decoder.

7. To cancel any existing pairing, select the check box against the pair and click the Update link. Finally click the Save button to remove the pairing details.

8. To modify an existing paring, click the Edit (pencil) symbol against a pairing. The paring details appear in edit mode. Modify the details and click the Save button to apply the modification.

DSTV Contact Number

DStv WhatsApp

DStv Self Service is on WhatsApp