Kwikset Smart Lock Reset Guide

20/10/2024 Freddy USA Comments Off on Kwikset Smart Lock Reset Guide
Views: 67

Kwikset Smart Lock Reset Guide

To reset the Kwikset Smart Lock, Locate the battery pack on the interior side of the lock and remove it. Continue holding the button for about 30 seconds until you hear a beep and the status LED flashes red.

Resetting a Kwikset smart lock typically involves the following steps:

  1. Remove the battery pack: Locate the battery pack on the interior side of the lock and remove it.

  2. Press and hold the program button: While reinserting the battery pack, press and hold the program button. Continue holding the button for about 30 seconds until you hear a beep and the status LED flashes red.

  3. Press the program button again: Release the program button and press it once more. The LED should flash green and you’ll hear one or two beeps, indicating the lock has been reset

  4. Perform the door handing process: The lock may need to relearn the orientation of the door. Follow the lock’s instructions to complete this process, which usually involves opening and closing the door a few times

  5. Add user codes and reconnect to smart home system (if applicable): If your lock was connected to a smart home system, you’ll need to reconnect it. You’ll also need to add any user codes you want to use.

Kwikset smart lock

Also Read : Spotify Not Connecting to Sonos Issue Solved

Important Notes:

• Factory reset vs. network reset: Some Kwikset locks have two types of resets: a factory reset, which erases all data and settings, and a network reset, which only removes the lock from your smart home network. Make sure you know which type of reset you need.

• Consult your lock’s manual: The exact steps may vary slightly depending on the specific Kwikset lock model you have. It’s always best to consult your lock’s manual for the most accurate instructions.

• Alternative reset methods: Some Kwikset locks may have alternative reset methods, such as using a reset button or a specific code on the keypad. Again, refer to your lock’s manual for details.

If you encounter any difficulties during the reset process, you can find additional support on the Kwikset website or by contacting their customer support team.