https // TS3522

https // TS3522

The Canon Ts3522 printer’s wifi password is typically printed on a sticker within the setup guide. To link your Canon Ts3522 printer to any wireless network, locate the sticker and input the password.

Canon PIXMA TS3522 printer uses the standard yield Canon PG-275 black and Canon CL-276 tri-color ink cartridges. This printer is also compatible with the high yield Canon PG-275XL black and Canon CL-276XL tri-color ink cartridges.

Registering Printer with Canon PRINT Inkjet/SELPHY

Click Download to start setup.

Follow the on-screen instructions to complete the setup.

1. If you are using Internet Explorer 9 or later, the following message appears when you click Download.

2. Select Save as from the Save menu and save it to any location.

3. Once download is complete, the following message appears; click Run. After that, follow the on-screen instructions to complete the setup.

Wireless Setup Using WPS for Printer – PIXMA TS3120, TS3122


Set up a wireless connection with your PIXMA TS3120 / TS3122 printer using the Wi-Fi Protected Setup (WPS) method.


WPS is a faster and easier wireless connection between a router and your wireless devices.

WPS Connection

  1. Make sure the button on the wireless router is ready to be pressed.
  2. Press and hold the Network button (A) on the printer, and then release the button when Network status icon (B) flashes.

    Image shows the Network button and then the Network status icon flashing

  3. Press and hold the WPS button on the wireless router within 2 minutes.
  4. When connection to the wireless router is complete, Network status icon and Signal Strength icon (C) will be lit.

Image of the Network status icon and Signal Strength icon lit

If the Alarm lamp lights up, see Troubleshooting.

  1. The network connection setup is now complete.
  2. Return to the application software and proceed with the installation.


Click Setup icon in the taskbar, follow the on-screen instructions to proceed with setup.

Windows Taskbar

The setup software is located on the CD that came with your printer.
If you do not have the CD, or if your computer doesn’t have a drive that can read discs, you can download the setup software.


Click Setup icon in the Dock, follow the on-screen instructions to proceed with setup.