https //ij.start.canon TS3420 : How do I Connect my Canon TS3420?

https //ij.start.canon TS3420 : How do I Connect my Canon TS3420?

Use ij.start.cannon to set up your TS3420 product. Get inkjet Canon printer and scanner support here. You can learn for Canon PIXMA, image PROGRAF, MAXIFY, CanoScan, and others.

In this article, we have explained the process to setup Canon printer wired and wirelessly on Windows and Mac device. In order to setup printer, it is important to install the latest drivers. However, it is important that you know printer model number, so that you can find latest Canon IJ Setup Drivers.

You need to have a router or modem at your home to do this connection and the access points should also work properly. You should have a device with an internet connection to make this Canon ij setup on computer or on smartphone.

Learning how to set up your Canon ij printer is a breeze with the help of ij.start.canon, and you’ll have a far more satisfying experience as a result. This is the main online resource for Canon products, where you can get user guides, FAQs, and more.

What’s more at the http //ij.start.canon site is download and installation steps for Canon ij setup that is required for the complete Canon set up process. So check out the more steps below.

How do I Connect my Canon ts3420?

Setting Up a New Printer

  1. Remove all the orange tape. The actual locations of the tape may vary.
  2. Connect the power cord, and then press the ON button.
  3. Install the ink cartridges.
  4. Load plain LTR or A4 size paper.
  5. The printer setup is now complete.
  6. Next, connect the printer to this computer/smartphone.
  7. Connect the printer to this computer (Windows).
  8. Download and run the software to start setup on your computer
  9. Follow the instructions

Wi-Fi Connection

Make sure printer is turned on before starting wireless connection setup.

If the power is on, the ON lamp (A) will be lit.

figure: ON lamp lights up

  1. If the ON lamp on the printer is flashing, press the Stop button (B).
    figure: The ON lamp flashes; press the Stop button

Easy Wireless Connect may take some time. Internet connection may become temporarily unavailable during setup.

Easy Wireless Connect is not available on Chrome OS or Windows 10 in S mode. Select Other setup.

Set up a Canon inkjet printer

Follow most used and simple steps to start setting up your Canon IJ printer, check below;

  1. At first, open your systems like a PC or laptop

  2. Secondly, connect your Canon inkjet printer to the system through wired or wireless (If you have a wireless Canon device).

  3. Third, launch a web browser (default or any other) and enter ij.start.canon or https //ij.start.cannon in the address search bar

  4. Tap enter, and wait for the Canon website to open that will show you different steps

  5. Click the Configure icon and wait for a new window to make you ask for a model number

  6. Enter your Canon model number, hit Enter, and install the setup.

Complete Installation Guide for ij.start.cannon

Follow the below guide and set up your Canon printer;

  1. Download software – Visit ij.start.canon and download the Canon driver.

  2. Install and Select connection type – Double-tap on file and select wireless or USB connection.

  3. Turn ON the Canon printer – Press the button to turn on the printer.

  4. Connect WiFi – On a wireless connection, press and hold the WiFi alarm to connect.

  5. Flashing blue and green lamps – If you find this situation, it means the printer is connected to WiFi.

  6. Agree on the terms to install – Read and agree to the license terms of Canon set up in order to install.

  7. Finish the Canon Printer Setup – Tap on Complete to finish the final step.

Setting Up Canon IJ Printer With USB –

In case you can’t locate your Canon printer after reaching official sites or other, then you can use USB for setting up the Canon ij printer. Or you can also visit http //ij.start.cannon for taking help;

  1. Make sure you have a USB cable.

  2. From the web browser, go to the ij.start canon site and choose setup network connection via USB.

  3. Jump next and wait for the Canon software to connect your printer to PC with the help of a USB cable.

  4. Hit Next and get the driver for your printer and check whether you want to connect the printer to a particular network.

  5. Then tap YES and hit the Complete button and jump to Add printer option.

  6. Tap Add and get a driver from http //ij.start.canon site.

  7. Now, go to Device setting, then LAN settings, and choose the connection.

  8. Install Canon drivers, inkjet cartridges, and check the connections for your device.

  9. Configure the Canon printer and Try printing.