ARC Raiders | Use The Rotary Encoder to Activate the Server Switch

In ARC Raiders, the “Server Switch” refers to a specific interaction found in certain missions or bunkers where you must manually restore power or data flow.

Unlike a standard “Hold F to interact” prompt, some of these switches require mechanical input.

To activate the server switch using the Rotary Encoder (the dial mechanism on the in-game console):

How to Operate the Switch

1. Locate the Console: These are usually found in the backrooms of Buried City or inside industrial SFERA facilities.

2. Approach the Dial: Look for the physical rotary knob on the panel. You will see a circular UI element appear.

3. The Rotation Mechanic: * Instead of just pressing a button, you must rotate your mouse in a circular motion (or use the analog stick in a circular sweep).

   • Watch the Status Ring on the screen. It will fill up as you “spin” the encoder.

   • Note: If you stop spinning, the progress bar will start to decay quickly. You must maintain a steady rhythm until the “Server Linked” notification pops up.

Also Read : YouTube Activate Page

Troubleshooting Common Issues

Since you’ve been looking into technical errors and “Input Validation” recently, here are the two most common reasons this specific interaction fails in ARC Raiders:

• Input Latency/Frame Drops: If your FPS drops below 30 while interacting with the dial, the game may miss the “rotation” inputs, causing the dial to stutter or reset. Lowering your global illumination settings can help stabilize the interaction.

• Keybind Conflict: If you have remapped your “Interact” key or are using a controller with a high deadzone, the circular “Encoder” logic can sometimes break. Resetting the “Movement” or “Interaction” binds to default usually fixes this.

Strategic Tip: The “Hot” Server

In high-intensity extractions, activating the server switch often triggers an ARC Alarm.

• Don’t Spin Alone: Have one teammate watch the door with a Shock Trap or Sentry, as the sound of the rotary encoder attracts nearby Drones and Raiders immediately.

• Check the Cables: If the switch won’t turn at all, follow the glowing orange floor cables; one of the Power Cells nearby might be missing or blown, preventing the encoder from drawing power.