Dear Guest, Please Register to Download Free Seminar Reports and PPT of each topic. The Download link will be visible only after the registration.Please search the topic before posting.

Please click the Facebook Like Button if you are satisfied

 Subscribe To Get Latest Seminar Reports and PPT

Receive all seminar updates via Facebook. Just Click the Like Button Below

?

Custom Search

Detection and Tracking Algorithms for IRST

Huge Collection of Electronics Seminar Topics, Reports and PPT.

Detection and Tracking Algorithms for IRST

Postby Prasanth » Wed Sep 11, 2013 7:45 am

Infrared search and track system is an integral part of modern weaponry. The detection and tracking algorithm forms the heart of an IRST system and their effectiveness plays an important role in determining performance of the system. This report studies various detection and tracking algorithms for multiple point targets in noisy environment resulting in very low signal to noise ratio. Target detection is carried out using spatial-temporal techniques needing multiple frames, since targets are assumed to be irresolvable in a single image frame. The tracking algorithms are classified in the basis of different approaches for data selection and model selection. Data selection and model selection is used for tracking multiple targets in dense clutter environment. An overview of the Interacting Multiple Model Expectation Maximization algorithm, and brief description of Multiple Hypothesis Tracking and Joint Probabilistic Data Association Filter algorithm is also presented.

Introduction

The ever-increasing effectiveness of electronic warfare and the advent of anti-radiation missiles create the need for covert, radar silent operations. Therefore systems are required which are virtually immune to jamming, undetectable and yet capable of detecting targets at reasonable ranges. The infrared search and track system (IRST) is the most suitable choice for such scenario. IRST is a system that surveys environment by analyzing the infrared radiation, emitted by the targets compared to background. The major work of the IRST is detection and tracking of target. In a practical scenario target are not in ideal conditions, they are generally surrounded by clutter. Hence so detection and tracking is much more complication in practical scenario. The developments of efficient clutter rejection algorithms are important to detect the targets in the modern IRST systems. In low signal to noise (SNR) situation, the target could not possibly be localized on the single frame so the successive frames are used to detect the target. If the alignment is done properly the signals of the various images would add up and a signal with suffiently large SNR are achieved, while the noise will be cancel out. This approach of detection of dim target is usually referred as target before detection (TBD) and generally used for detection of dim targets. Tracking is the estimation of the state of the moving object based on the remote measurement. It uses models of the real environment to estimate the past and present and even predict the future. The use of a tracking system is to extract information from a dynamic system. A track is a symbolic representation of a target moving through an area of interest and represented by a filter state which gets updated on each new measurement.

2. IRST system

It is becoming common for passive electro-optical sensors to be included in the design of airborne and terrestrial military platforms. Passive electro optical sensors are valued for their lack of sensor emissions, electronics countermeasures immunity. IRST system is wide field of view passive electro optical surveillance system designed for autonomous target detection and track acquisition. An IRST system uses thermal sensor to detect targets. A typical IRST system as shown in fig.1 have thermal detector which receives the thermal signatures of the target. The thermal signature is then processed by font end electronics and given to the tracker. The function of the tracker is to detect and tracking the target and give coordinate information to the servo control unit for controlling the sensor head. The control and display unit is a user interface with the system, where the target information is displayed.
You do not have the required permissions to download the files attached to this post. You must LOGIN or REGISTER to download these files.
User avatar
Prasanth
Site Admin
 
Posts: 475
Joined: Sat May 28, 2011 6:29 pm

Re: Detection and Tracking Algorithms for IRST

Postby jagtap » Wed Mar 05, 2014 1:39 pm

plz....can u give the ppt of this........... :)
jagtap
 
Posts: 1
Joined: Wed Mar 05, 2014 1:04 pm



Return to Electronics Engineering Seminar Topics