Project Topics

Engineering Projects


The objective of this project is to generate electric power through the fabrication of wind mill.


Now day's power demand is increased so this project is used to generate the electrical power in order to compensate the electric power demand.

Brief Methodology:

This project is designed with fan arrangement, Dynamo, Rectifier with Filter and Battery .

Fan arrangement is the mechanical arrangements which are easily rotated. The rotating speed is depends upon the wind strength. The fan arrangement is coupled with the dynamo. So whenever the fan is rotated due to wind, the dynamo also rotated.

The electric power is generated in the dynamo. The generated electric power is the alternating voltage.

The AC voltage given to the rectifier circuit will convert into DC voltage. Then the rectified voltage is given to filter circuit to remove the ripple voltage. After the filtration the pure DC voltage is given to battery through the charging circuit. The stored DC voltage is used to different application